Skip to main content

How to Install eSIM on an iPhone?

Updated over 3 weeks ago

How to Install an eSIM on Your iPhone

Installing an eSIM on your iPhone is straightforward and can be done via QR Code, manual entry, or using an app. Below is a comprehensive guide that covers each method to help you set up your eSIM easily.

Installation Methods

1. Install via QR Code

Using the Same iPhone:

If the QR code is saved on your iPhone:

  1. Save or screenshot the QR code to your Photos.

  2. Go to Settings > Cellular (or Mobile Data) > Add eSIM (or Add Cellular Plan).

  3. Tap Use QR Code > Open Photos.

  4. Select the saved QR code image. Your iPhone will scan it and begin installation.

  5. Follow the on-screen instructions until installation is complete.

Using Another Device:

If the QR code is on a paper or another device:

  1. Open Settings > Cellular (or Mobile Data) > Add eSIM.

  2. Tap Use QR Code.

  3. Scan the QR code.

  4. Follow prompts until the eSIM line shows as installed and active.

2. Manual Installation

If you received configuration details (e.g., SM-DP+ address and Activation Code):

  1. Open Settings > Cellular (or Mobile Data) > Add Cellular Plan.

  2. Tap Enter Details Manually.

  3. Enter the SM-DP+ Address and Activation Code provided in your email or instructions. Leave the Confirmation Code blank if it’s not required.

  4. Follow on-screen instructions to complete the setup.

3. Automatic Installation via the Nomad App

  1. Open the Nomad App.

  2. Select your eSIM and tap Add eSIM to Your Phone.

  3. Follow the in-app instructions to complete the installation.

  4. After installation, make sure Data Roaming is enabled to use your eSIM globally.

Post-Installation Steps

  1. Check your installed eSIM by going to Settings > Cellular (or Mobile Data). The new plan should be listed under your available lines.

  2. Label your eSIM for easier management (e.g., “Travel,” “Work”).

  3. Ensure Data Roaming is turned on if the eSIM is for international use.

  4. Set the eSIM as your default line in Settings > Cellular > Default Line.

Troubleshooting Common Issues

  • Internet Connection Required: Ensure you’re connected to Wi-Fi or cellular data during installation.

  • Cannot Scan QR Code: Ensure the QR code is visible and clear. If scanning from the iPhone itself, save the image in photos.

  • eSIM Not Showing: Restart your iPhone and check again in Settings > Cellular.

For additional help, contact Nomad Support directly for troubleshooting.

Related Topics

With these instructions, you can easily install and manage your eSIM on any compatible iPhone.

Did this answer your question?